Tinnitus Mapper + Hearing Test

Enhanced prototype with split left/right channels, session timer + fade-out, a stereo distraction channel including slow waves, and a targeted hearing test that can probe around each ear’s selected tinnitus frequency.

Safety: begin at very low volume, use wired headphones if possible, and stop immediately if anything feels sharp, unpleasant, or makes symptoms worse. This is a self-experiment tool, not a medical device.

1) Match tinnitus 2) Session timer 3) Hearing test

1) Match tinnitus per ear

Left ear

6000 Hz
Base 6000 + fine 0

Right ear

6000 Hz
Base 6000 + fine 0
Triangle/saw can feel closer to hiss for some users.
Tone: Stopped

Quick jumps

2) Session timer + fade

Runs in stereo using your left/right ear settings.
Speaker mode duplicates the session into both channels so it can play in the room.
Helpful as a softer background under the matched sound.
Tone
Stopped
Mask
Stopped
Distraction
Off
Session
Idle
Time left
--:--
Master output level

3) Targeted hearing test

This test starts audible and ramps down to silence. Hold Space while you can hear the tone. Release when you lose it. The tool records the level where you let go. It can test a standard set of frequencies or zoom in around the tinnitus frequency you matched for each ear.

Test settings

Use headphones for best channel separation.
Hold mode is more continuous. Release mode is easier for many users.
Targeted adds close probes around each matched ear frequency.
Keep this the same each time so repeat tests are more meaningful.

How to use it

  1. Press Start hearing test.
  2. The tone starts audible in one ear.
  3. Choose hold or tap-on-loss mode.
  4. Use the countdown and wait between tones to reset.
  5. Each frequency advances automatically.

If you hear the whole fade in hold mode and never let go, the result is stored as MAX. In tap mode, no tap now also records as MAX. If you never hear a tone, tap as soon as you realise a tone is playing but you cannot hear it, and it will be stored as NH.

Live test status

Current ear
--
Current frequency
-- Hz
Test state
Idle
Space held
No
Next tone in
--

Results chart

X-axis zoom start
X-axis zoom end

Results table

Each hearing test is saved as a separate run. Toggle a run on/off, delete it from the graph, or hover points on the chart to inspect exact values.
Show Run Summary Actions
No results yet.